Sers

• Nick: sers
• Nationality: German
• Current clan: Demonic Core
• Aliases: Rakone; yggdrasil
• First spawned: 1996
• Map: DM4 and End
• Colors: 12 2
• OS: FreeBSD 10.2-RELEASE-p7; Windows 7 PROFESSIONAL
• Client: ezquake-e3707f1

Clan history

• Bodycount
• Demonic Core

Quotes

lo; tnx; pld

Cmdline

Cmdline [insert setup and client location, an ezquake nightly build in my case]

-mem 512 -noforcemparms -noforcemaccel -noforcespd -nocdaudio -ruleset smackdown

Scripts

Ready - Break script

alias red_1 "ready ;bind p red_0"

alias red_0 "break ;bind p red_1"

Volume script

alias Select.Vol.01 "volume 0.05 ;bind l Select.VOL.00 - Select.VOL.02;echo - volume set to: 0.05"

alias Select.Vol.02 "volume 0.1 ;bind l Select.VOL.01 - Select.VOL.03;echo - volume set to: 0.1"

alias Select.Vol.03 "volume 0.15 ;bind l Select.VOL.02 - Select.VOL.04;echo - volume set to: 0.15"

alias Select.Vol.04 "volume 0.2 ;bind l Select.VOL.03 - Select.VOL.05;echo - volume set to: 0.2"

alias Select.Vol.05 "volume 0.25 ;bind l Select.VOL.04 - Select.VOL.00;echo - volume set to: 0.25"

alias Select.Vol.00 "volume 0.0 ;bind l Select.VOL.05 - Select.Vol.01;echo - volume set to: 0.0"

Teamplay messages ON/OFF script

alias teamplayon "exec config/teamchats.cfg; echo TP_MSGS ON; bind F9 teamplayoff"

alias teamplayoff "exec config/bindings.cfg; echo TP_MSGS OFF; bind F9 teamplayon"

Guides

Mouse polling rate - USB port patch 500/1000hz

This patch has been tested on winxp sp2 and sp3 using the G1 mouse. [usbmrs11.exe]

Applying the patch using winxp sp2;

Use the mouserateswitcher (usbmrs11.exe) to patch your usb port.

Step 1:

Boot your os in safe mode with administrator privileges.

Step 2:

Locate the usbmrs11.exe tool, execute it, to apply the patch click 'Patch' and do a 'Y' (YES) at the desired rate/hz, for instance 500/1000hz.

Step 3:

Reboot your os normally and use the mouserate.exe tool to verfify that your mouse is working at the set rate/hz.

Remark:

I would advise that you patch the USB port at 500hz, since it has proven that 1000hz does not always function flawlessly.

Applying the patch using winxp sp3;

Given that you have upgraded from sp2 to sp3, the usbmrs11.exe tool will return an error when patching your usbport.sys file. A workaround for this problem is simple.

Step 1:

Use your original winxp home/professional install CD and extract the usbport.sys file from the SP2.CAB file.

Step 2:

Create a backup of your usbport.sys file in use, which is located in the directory C:\WINDOWS\system32\drivers and keep this backup. Just in case something should go wrong and you can then rollback to the previously working usbport.sys file.

Step 3:

Overwrite the usbport.sys file in C:\WINDOWS\system32\drivers with the one you have extracted from the SP2.CAB file from your original winxp install CD.

Step 4:

Reboot your os normally to see if everything works properly.

Step 5:

Reboot your os in safe mode with administrator privileges and follow the instructions given at Applying the patch using winxp sp2.

Step 6:

Use mouserate.exe to verify that your mouse is working at the set rate/hz.